Takeda USA, is pleased to announce the release of their new Takeda Retain Short Ram intake for the 2003-06 Infinity G35 Coupe and 04-07 Infinity G35 Sedan part number TR-3001P. The Takeda Retain Short Ram air intake replaces the bulky and inefficient factory intake increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response.

Takeda USA, is pleased to announce the release of their new Takeda Retain Short Ram dual intake for the 2008-09 Infinity G37 part number TR-3008P. The Takeda Retain Short Ram air intake replaces the bulky and inefficient factory intake increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response.

The Infiniti G35 is high-tech with a standard smart key where the doors unlock automatically in the presence of the key and you can start the car with a push of a button. K&N has designed a performance air intake system (69-7082TS) with a powder coated silver finish for the 2007 Infinity G35 sedan with a 3.5 liter V6 engine. K&N dynamometer tests show an 8.13 horsepower gain at 5960 rpm. The G35 Sedan is a dual throttle body car, and the K&N air intake system is also dual to match the stock system. There are two short ram intake systems with powder coated aluminum tubes, K&N high flow lifetime replacement air filters (RU-4960) and powder-coated steel heat shields that come as part of the 69-7082TS.

The 2007 and 2008 Infiniti M45 sedan is a formidable mid size car that combines luxury with performance, impressing even the most jaded luxury automobile consumers.K&N has released a flat panel replacement air filter (33-2398) for the 2007 and 2008 Infiniti M45. This replacement air filter simply slides into the factory air box and is held in place by the air box lid. No cutting or fitting is required. K&N replacement air filters are designed to increase horsepower while providing excellent engine protection. K&N air filters have been hand crafted in the United States since 1969 using only the finest materials.

The STILLEN Z/G Headers are the finest available. With months invested in development work, these headers produce big increases in streetable power and torque on both naturally aspirated and forced induction vehicles. The equal length design of the headers provides better and more efficient exhaust scavenging which contributes to the performance gains proven on the dyno, the 2008 G37 made 14 HP and 11 ft/lbs! These hand crafted shorty headers do not require the elimination of catalytic converters. STILLEN manufactures our high performance headers from varying materials according to application parameters. All of our uncoated headers are stainless steel for long life and corrosion resistance. Our ceramic coated headers are for those who want an additional thermal barrier to lower engine bay temperatures as well as excellent stain and rust resistance.

This Nissan/Infiniti revised Skunk2 Version 2 intake manifold plenum spacer is dyno proven and road tested to outperform all other manifold plenum spacers currently being sold. I addition, it has numerous improvements and features. The Skunk2 spacer effectively increases plenum volume, lowers intake air temperatures, and allows front cylinders to breath more efficiently resulting in gains of up to 10+ hp to the wheels, and increased throttle response, and over 2MPG increase in fuel efficiency.

STILLEN now has high flow replacement catalytic converters for the 2007-2008 Nissan 350Z and 2008 Infiniti G37. These are for the enthusiast that wants a big boost in power, while remaining environmentally responsible.

Though these converters are not CARB legal, STILLEN High Flow Catalytic Converters reduce emmissions when compared to an open “race pipe”.

If you own an Infiniti G37 Coupe or Nissan Sentra and do not want to put holes in your front fascia in order to mount your front license plate, then these kits were developed for you!

Our kits install where the factory tow-hook is screwed in (accessed through the lower factory grille for the G37 Coupe and front bumper for the Sentra). It’s as quick & easy to remove as it is to install, making it perfect for shows & other situations where having a front plate just wouldn’t look right.

The Infinity M35 uses Nissan’s tried and true 3.5 liter V6 engine which drives the rear wheels with a five-speed automatic transmission. It is also a luxury sports sedan with a lot of technology that combines a lot of cabin gadgets with elegant styling.

K&N Engineering manufactures a new lifetime replacement air filter (33-2397) for the 2008 Infinity M35 3.5 liter V6 engine and the 2007 Infinity M35 3.5 liter V6 engine. Hand made in the United States, the 33-2397 is designed to increase horsepower and acceleration while providing excellent filtration.

Fidanza has expanded its new line of performance twin-disc clutches with applications for the Nissan 350Z and Infiniti G35 and G37.

Fidanza twin-disc clutches dispel the notion that creature comfort must be sacrificed for clamping force.  They are engineered to tackle up to 900 lbs.-ft. torque while stock pedal pressure is virtually unchanged and engagement feels as smooth as a typical Stage 3 single-disc clutch.

“These Nissan and Infiniti vehicles are popular platforms for extreme horsepower enhancements,” noted Bob Scheid, vice president, Fidanza.  “But all that power is only beneficial if you can harness it properly, which is precisely why we’ve engineered these new twin-disc units.”

STILLEN’s Cat-Back Exhaust System for the 2008 Infiniti G37 recovers substantial horsepower and torque, giving your G37 the extra edge of performance. This Cat-Back System is a true dual setup, and is crafted of mandrel-bent stainless steel for a long service life. At idle the STILLEN Exhaust is unobtrusive, however when pressed, STILLEN’s recognizable, trademark sound emanates. This is a pleasing tone, authoritative and yet responsible. Not only does this exhaust system have a sharp, show ready look, but it also offers impressive horsepower and torque gains as well as a limited lifetime warranty and is easy to install.

Brake Pro’s 6-Piston, two-piece 14.25” rotor AP Racing brake system is the ultimate front brake upgrade for the Infiniti G37. Packing a massive increase in stopping power, this kit provides confidence around town and at track days. As with all AP Racing kits, it is designed to perform with the factory OE master cylinder and is fully compatible with the factory ABS system. At the heart of this kit are our world famous AP Racing 6-Piston aluminum calipers and 14.25” (362mm) cross-drilled and slotted two-piece rotors with aluminum hats. This setup virtually eliminates the fade found in the stock brakes. All of our big brake kits are delivered complete with caliper mounting brackets, DOT-compliant stainless steel brake lines, Mintex Xtreme brake pads and all the necessary high-grade installation hardware.

If you have lowered your car, your rear camber is probably off and the best solution to correct your suspension setup is STILLEN’s New Rear Camber Adjusters complete with Rod-Ends. Designed for race-precision adjustments and long service life, these rear camber adjusters are equipped with hemispherical rod-ends that allow finely controlled rear suspension travel & predictable response. They also improve handling and allow for even tire wear!

STRUT the American design company known globally for their refined jewelry accessories for luxury automobiles, has introduced the stunning Ginza Marquise Collection™ designed exclusively for the 2007–2008 Infinity FX35, and FX45 Series SUVs.

The bold exterior design of this dramatic premium crossover SUV combined with the Ginza Marquise Collection from STRUT, makes a design statement that reflects the owners passion for perfection.

The Ginza Marquise Collection is handcrafted from the finest metals available, triple-chromed and highly polished for durability that will withstand a variety of weather conditions.  The full collection includes one diamond woven mesh primary grille with the distinctive STRUT shield and one matching grille for the lower air-intake vent.  Another STRUT shield is included for placement at the rear of the vehicle.  Suggested retail price for the collection is USD $5,000.

With its enormous chrome trim, the trunk of the new 2007 G35 Sedan simply looks unfinished.  This new trunk wing from STILLEN picks up where the factory left off and adds the finishing touch without over powering the factory lines.  It does not cover the trunk release button and can be easily installed without any drilling or modification to the factory sheet metal.

The wing is made of durable urethane in STILLEN’s Costa Mesa, CA facility and carries a limited lifetime warranty against defects under normal use and conditions.  The part comes ready for prep and paint and because STILLEN has been manufacturing quality urethane products for more than 20 years you can be sure that it will fit properly and stand the test of time. Part #103869