Takeda USA, is pleased to announce the release of their new Takeda Attack cold air intake for the 2006-10 Honda Civic SI part number TA-1004P (Polished) and TA-1004B (Black Powdercoated). The Takeda Attack cold air intake is a true cold air intake bringing in fresh air through the front of the vehicle, which increases air volume and improves air velocity for increased horsepower, torque and improved throttle response.

An engine’s camshafts must be set at their proper positions relative to the crankshaft in order to maximize horsepower. Pro Series Cam Gears enable serious tuners to optimize horsepower and torque by being able to adjust camshaft timing, allowing them to tailor the power curve appropriately. Thanks to laser-etched timing and directional marks, precise camshaft adjustments can be made quickly and easily. Pro Series Cam Gears feature precision-machined, hard-anodized teeth to reduce premature wear with a signature, six-bolt design that eliminates gear slipping.

Skunk2’s already popular Strut Tower Bars, designed to tie the vehicle’s upper suspension points at its shock towers, are now available in an exclusive Black Series finish. Skunk2’s Strut Tower Bars increase chassis rigidity and strength, which improves overall handling performance and chassis response. Skunk2’s Strut Tower Bars are manufactured from ultra-strong, lightweight 6061 aluminum and yield the most impressive strength-to-weight ratio of any strut bar available.

Takeda USA, is pleased to announce the release of their new Takeda Attack cold air intake for the 2006-2010 Honda Civic with the L4-1.8L part number TA-1012P. The Takeda Attack cold air intake is a true cold air intake bringing in fresh air through the front of the vehicle, which increases air volume and improves air velocity for increased horsepower, torque andimproved throttle response. TA-1012P utilizes specially designed 2-piece polished aluminum intake tubes to guide the air into the motor and provide an aggressive style. Takeda air intakes use the brand new Pro Dry S filter from aFe, which uses a progressive synthetic media, requiring no oil to recharge for maximum convenience and filtration.

The 2009 Honda Fit was completely redesigned for 2009. It is a bit longer and wider than the 2008 model and has added interior space, sharper handling, enhanced seating functionality, and a more powerful engine. K&N has designed a performance air intake system (69-1017TTK) in black for the 2009 Honda Fit with a 1.5 liter engine that is guaranteed to increase power.  K&N dynamometer tests show the 1.8 liter engine gained 4.53 horsepower at 6000 RPMs with this air intake kit. The 69-1017TTK has lower restriction than the factory air box system. It draws air through a high flow washable and reusable chrome top K&N air filter (RC-9630) which is protected by a powder coated heat shield.

Takeda USA, is pleased to announce the release of their new Takeda Retain Short Ram intake for the 2009 Acura TL and 2008-09 Honda Accord V6 3.5L part number TR-1007P. The Takeda Retain Short Ram air intake replaces the bulky and inefficient factory intake increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response. TR-1007P utilizes a specially designed 1-piece clear coat polished aluminum intake tube to guide the air into the motor and provide an aggressive style.

The 2010 Honda Insight is a hybrid vehicle designed for consumers who may want to make an environmental statement. It seats five and is offered with a hybrid powertrain and front-wheel drive. Honda put an Eco Assist system on the Insight that helps drivers reach the best mileage by changing the background color of the speedometer from blue to green as efficiency increases. There is also a bar display that shows a thinner bar when fuel is being conserved. K&N has designed a washable and reusable lifetime air filter, part number 33-2433, for the 2010 Honda Insight with a 1.3 liter engine. It is made from cotton instead of paper and never needs to be replaced. K&N air filters provide less restriction than typical paper air filters which can increase the efficiency of the combustion process, creating more horsepower and torque.

Takeda USA, is pleased to announce the release of their new Takeda Attack cold air intake for the 2009 Honda Fit with the L4-2.0L part number TA-1003P. The Takeda Attack cold air intake is a true cold air intake bringing in fresh air through the front of the vehicle, which increases air volume and improves air velocity for increased horsepower, torque and improved throttle response. TA-1003P utilizes specially designed 1-piece polished aluminum intake tube to guide the air into the motor and provide an aggressive style. Takeda air intakes use the brand new Pro Dry S filter from aFe, which uses a progressive synthetic media, requiring no oil to recharge for maximum convenience and filtration.

Combining off-road capability with a reputation for reliability, the Honda Pilot offers excellent interior space optimization and a flexible seating design for passengers and cargo.  Unfortunately, the factory audio system may not meet your requirements for accurate sound and performance. Adding a subwoofer is the single, most significant improvement you can make to a car audio system, according to the sound engineers at JL Audio.  Not only do the listeners get the benefit of more powerful and cleaner bass performance, but with proper system design, you can also relieve the small front and rear speakers in the vehicle from the burden of reproducing bass.  The result is significantly improved sound over the entire spectrum.

The 2008 Honda Accord’s newly redesigned sleek body styled combined with Honda’s 2.4 liter VTEC four cylinder engine practically ensure that it will become a best seller in the U.S. auto market. For 2008 Honda Accord owners that want more power K&N has designed a new air intake system (69-1211TTK) in black for the 2008 Honda Accord 2.4L engine. K&N dynamometer tests show an 11.13 horsepower increase at 5600 RPM with the K&N air intake system installed.

Takeda USA, is pleased to announce the release of their new Takeda Retain Short Ram intake for the 2006-09 Honda Civic Si with the L4-2.0L part number TR-1004P. The Takeda Retain Short Ram air intake replaces the bulky and inefficient factory intake increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response. TR-1004P utilizes specially designed 1-piece polished aluminum intake tube to guide the air into the motor and provide an aggressive style. Takeda air intakes use the brand new Pro Dry S filter from aFe, which uses a progressive synthetic media, requiring no oil to recharge for maximum convenience and filtration.

Takeda USA, is pleased to announce the release of their new Takeda Retain Short Ram intake for the 2008-09 Honda Accord with the L4-2.4L part number TR-1001P. The Takeda Retain Short Ram air intake replaces the bulky and inefficient factory intake increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response. TR-1001P utilizes specially designed 1-piece polished aluminum intake tube to guide the air into the motor and provide an aggressive style.

K&N is proud to introduce its 33-2948 replacement air filter for the 2007, 2008 and 2009 Honda Civic Type R with a 2.0 liter engine. The Japanese and Malaysian market Type R Civic was sold in 2007 for the first time as a four door sedan. The new Type R is bigger, wider and heavier than the original three door Type R Civic hatchback sold in Europe. This unique replacement air filter is designed to increase horsepower and acceleration while providing excellent filtration. The 33-2948 is custom designed to fit into your existing airbox. To add performance to your Honda Civic Type R simply remove the disposable air filter and replace it with the K&N air filter.

advanced FLOW engineering (aFe), an industry leader in performance intakes, filters, manifolds and exhaust systems is pleased to announce the release of their Stage 2 air intake system with for the 2006-08 Honda Civic with L4-1.8L part numbers 54-11432 and 51-11432. aFe Stage 2 air intake system features a one piece heat shield for maximum air control.  This system also includes a performance engineered rotomolded plastic housing for maximum air control and performance.  54-11432 includes the Pro 5R performance air filter, which utilizes 5-layers of progressive cotton media for maximum flow and performance.  51-11432 includes the new Pro Dry S filter, which utilizes 2-layers of progressive synthetic media that requires no recharging oils for maximum convenience.

AP Racing’s 4-Piston calipers, matched with Brake Pro’s two-piece 13"x1.10" (330mm x 28mm) rotors make this AP Racing street brake system the ultimate front brake upgrade for the Honda S2000. When combined with our matching cross-drilled and slotted rotors in the rear, this 4 corner upgrade packs a massive increase in stopping power. These complete kits provide confidence around town, through the canyons or at track days. As with all AP Racing kits, they are designed to perform with the factory OE master cylinder and are fully compatible with the factory ABS system.