For over 21 years, Steeda Autosports has been the undisputed leader in Mustang performance.  There simply is no other aftermarket manufacturer who has won more races, set more records, or won more championships than Steeda.  Vehicles with our performance parts and accessories have consistently outperformed and out gunned Shelby, Roush, and Saleen where it matter most – on the race track, at the dragstrip, and on the street. With the 2010 race season over we can once again proclaim that racers using Steeda performance parts have maintained their competitive advantage by using Steeda performance parts.  This does not happen by shear coincidence – rather it is the direct result of competent, skilled, and knowledgeable drivers using the very best performance parts available for their car – the Steeda Autosports line of track tested and race proved performance parts.

With the newly redesigned 2.4 liter 4 cylinder Gasoline Direct Injection (GDI) engine installed the 2011 Hyundai Sonata is set to deliver up to 200hp and over 180 ft lbs of torque. As powerful and efficient as the 2011 Sonata is, K&N has designed a full air intake kit to deliver more power and throttle response from a simple bolt on system. For over 40 years, K&N has been dedicated to performance filtration products and providing the best in intake performance upgrades. The new 69-5301TTK Typhoon Air Intake System is no exception to this philosophy. In fact testing of the air intake showed a 7.75 horsepower gain at 5147 RPM’s at the wheels. 

The TECHART GrandGT – extraordinary, confident and uniquely sporty. As of now exclusive Carbon Styling Kits are available for the distinctive individualization program for the Porsche Panamera. For highest demands on quality, design and sportiness. Carbon fibre components convince with extraordinary product properties such as an impressive dimensional stability, a great strength and a low intrinsic weight. The selected exterior components, which are made of carbon fibre, create unique highlights at the entire car.

Truly clean driving fun: The TESLA Roadster Sport BRABUS Green Package from the BRABUS Zero Emission business division and its cooperation partner RWE, one of the world’s largest producers of electricity, redefines the sports car. The exclusive BRABUS customization program for the first electric production sports car includes the RWE-BRABUS high-tech quick charging station for the customer’s garage and environmentally friendly RWE Eco Electricity for 30,000 kilometers (18,641 miles). Also included is a one-year RWE car electricity pass for free use of all public RWE charging stations.

Comp Turbo Technology, Inc. continues to expand and improve their line of high performance turbochargers by announcing the new model CT5 and CT6 turbochargers that have the capability of an extended performance range and more rapid acceleration than previously available CT models. The new CT5 and CT6 model features:

Looking for a custom-made show quality cooling system? How about unique decorative engraving that can be added to the top tank, like the ball-milled linear design and custom engraving shown here? Almost any design, slogan, club name, club logo, etc, can now be engraved in the top tank surface. Also available is custom anodizing in black satin for an OEM appearance, along with 16 brilliant candy colors, including polished gold. These coatings will not clog the delicate louvers or affect the radiators performance. Note the optional three interchangeable filler and top radiator hose fixtures. Mark 7 Custom Radiators are built one at a time, not on an assembly line.

The American market is one of the most demanding markets in the world. That’s why BRABUS (Brabus-Allee, D-46240 Bottrop, phone + 49 / (0) 2041 / 777-0, fax + 49 / (0) 2041 / 777 111, Internet http://www.brabus.com) has been present there since 1998 with its own branch, which serves its customers and dealers in the USA and Canada. In contrast to other tuners, it was more than just an office address from the very start. It was a full-fledged branch with its own marketing team, modern workshops, parts warehouse, training center and showroom for fully converted BRABUS vehicles.

The new Citroen C4 with its sporty, elegant and firmed design inspires in the Golf class. Thanks to H&R these attributes have been accentuated even more as the team from Lennestadt attended to the newest Citroen model straight after its launch. The result is the development of a spring set which brings this modern French car around 30 millimetres closer to the tarmac. This not only perfectly suits the C4 but also makes it several shades more dynamic. Despite the more sporty design there is still enough remaining comfort with the H&R lowering for every day use.

Centerforce strives to provide top of the line products on today’s market for all performance levels. To do so, Centerforce uses patented processes and constantly tests different materials and designs to find the best combination. The DFX® series by Centerforce ®, the next level in high-performance, is now available for 2002 - 2004 Ford Focus 2.0L SVT 6 speed. The DFX part numbers: 01011401 (Pressure Plate, Disc, & Aluminum Flywheel). This new clutch & flywheel assembly replaces the current assembly with a higher holding capacity pressure plate, designed for a direct bolt in replacement and ceramic button style disc.

ST suspensions announces their performance coilover for the 2008+ Audi TT 8J, 2WD and Quattro. The ST suspensions coilover for the 08+ Audi TT (8J) enables the owner to lower their vehicle 0.8-2.0 inches (0.4-1.4 inches Quattro) on the front axle and 0.8-2.0 inches (0.4-1.2 inches Quattro) on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. ST suspensions coilover with its preset dampening rates permits customized lowering of the suspension and creates an optimized balance of sportiness, comfort and safety.

advanced FLOW engineering (aFe Power), an industry leader in performance intakes, filters, manifolds and exhaust systems is pleased to announce the release of their new 7” Black Powder Coated Exhaust Tips. Nothing looks meaner than a big exhaust system and nothing is cooler than black. Upgrade the look of your exhaust with the huge 7” black powder coated, slash cut exhaust tip that fits any 4” exhaust system. aFe black powder coated 7” tip comes with a very cool lazer cut aFe Power badge for a clean yet aggressive look.

SPAL USA, a leading manufacturer of OEM and aftermarket electric cooling fans since 1959, has expanded its offering of curved blade fans, allowing fitment of the lightweight and quieter fans in more vehicles with tight space requirements. The new Curved Blade Puller Fans feature 12V Long Life motors IP68-certified as waterproof and dustproof.  SPAL’s expanded line now includes three low-profile offerings: a 10-inch model (#30100435) weighing in at 2.5 pounds; an 11-inch fan (#30100411) also 2.5-pounds; and a 12-inch unit (#30100467) that weighs only 2.75-pounds.  A new medium-profile, 12-inch Curved Blade Fan (#30101522) weighs in at 3.5 pounds.

At the core of Chevrolet’s Z06 Corvette is the LS7 engine. A 7.0 liter V8 with a performance rating of 505hp and capable of 0-60mph in just 3.7 seconds with top speeds reaching just under 200mph. Overlooking the complete package, the Z06 is a classic American icon of performance, speed and style. Now this machine can get the ultimate in engine protection and airflow with a K&N high flow replacement air filter.

Since 2009, GM has produced one of the world’s most recognized American supercars, the Corvette ZR-1. Designed to create one of the most unforgettable driving experiences on the planet, the 2009 through 2011 Chevy Corvette ZR-1 models are truly engineering marvels. Offered with a hand built LS9 supercharged 6.2L V8, the ZR-1 is rated at 638hp and 604ft. lb of torque, which is more than enough to put any road far behind you. K&N has designed a new High Flow Performance Air Filter to protect such a powerful engine while allowing more air into the intake. The E-0786 replacement air filter simply installs by removing the stock disposable filter and replacing it with K&N’s washable and reusable multilayer cotton gauze filter.

KW suspensions announces their stainless steel constructed coil-over for the 2010+ Mercedes E-Class Coupe (C207). Two Variants of the KW suspension line up will be available. The KW coilover suspensions for the Mercedes E-Class Coupe (C207) enables the owner to lower their vehicle 20-45mm on the front axle and 15-45mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving.